Detect Buttons Skill

Detect Buttons Skill

Guide user through button detection for an unknown mouse.

When to Use

Use this skill when:

• User has a mouse not in the built-in profiles
• User needs to determine Qt button codes
• User wants to verify button codes on their system

Steps

1. Explain the Process Tell the user:

   • They'll need to run code in Slicer's Python console
   • Each button press will print its Qt code
   • They should note which physical button maps to which code

2. Provide Detection Code Give the user this code to paste in Slicer Python console:

   import qt
   
   class ButtonDetector(qt.QObject):
       def __init__(self):
           super().__init__()
           self.detected = []
           slicer.app.installEventFilter(self)
           print("Button detection active. Press mouse buttons...")
           print("Press Ctrl+C in console when done.")
   
       def eventFilter(self, obj, event):
           if event.type() == qt.QEvent.MouseButtonPress:
               btn = int(event.button())
               mods = int(event.modifiers())
               if btn not in [b[0] for b in self.detected]:
                   self.detected.append((btn, mods))
                   print(f"Detected button: {btn} (modifiers: {hex(mods)})")
           return False
   
       def stop(self):
           slicer.app.removeEventFilter(self)
           print("\nDetection stopped. Results:")
           for btn, mods in self.detected:
               print(f"  Button {btn}")
           return self.detected
   
   detector = ButtonDetector()
   # When done: detector.stop()
   

3. Collect Results After user runs detection, ask them to share:

   • Which button code corresponds to which physical button
   • Any buttons that weren't detected

4. Map to Profile Help user create mapping:

   Code 1  -> Left Click (not remappable)
   Code 2  -> Right Click (not remappable)
   Code 4  -> Middle Click
   Code 8  -> Back / Thumb Back
   Code 16 -> Forward / Thumb Forward
   Code 32 -> Extra button (side, thumb, etc.)
   

5. Create Profile Use the add-mouse-profile skill to create the profile JSON.

Platform Notes

• Windows: Standard Qt codes usually work
• macOS: Some buttons may not generate Qt events if intercepted by system
• Linux: Standard codes work; evdev can detect more buttons

Troubleshooting

Button not detected:

• Check if system/​driver software is intercepting
• On Linux, check if user is in input group
• Try running Slicer as administrator (Windows)

Wrong button detected:

• Driver software may be remapping buttons
• Disable vendor software (Logitech Options, etc.)
• Reset mouse to default configuration

Example Output

Button detection active. Press mouse buttons...
Detected button: 1 (modifiers: 0x0)      # Left click
Detected button: 2 (modifiers: 0x0)      # Right click
Detected button: 4 (modifiers: 0x0)      # Middle click
Detected button: 8 (modifiers: 0x0)      # Back
Detected button: 16 (modifiers: 0x0)     # Forward
Detected button: 32 (modifiers: 0x0)     # Thumb button