Skill: cc-performance-tuning

Skill: cc-performance-tuning

STOP - Measure First

• Don't optimize based on intuition—profile first
• Correctness before speed - Make it work, then make it fast
• <4% of code causes >50% of runtime - Find the hot spot before touching anything

---

CRITICAL: Even In Emergencies

Production down? Losing money? User panicking? Especially then:

• Guessing wrong costs MORE time than 60-second profiling
• Multiple shotgun changes make rollback impossible
• Wrong "fix" can mask the real problem for days

Minimum crisis protocol (non-negotiable):

1. 60-second profiler check OR recent deployment/​config check
2. ONE change at a time
3. Revert immediately if no improvement within 5 minutes

Scope & Limitations

This skill covers: Single-threaded, single-process code tuning for general-purpose computing.

NOT covered (need specialized guidance):

• Concurrency: Lock contention often dominates; profile thread states, not just CPU
• Distributed systems: Network latency ~10,000x memory; optimize RPC/​serialization first
• Real-time systems: Need worst-case latency, not average; caching adds variance
• Embedded/​constrained: Memory/​power budgets require different tradeoffs

Quick Reference

Key Principles:

• Make it correct first, then make it fast
• Measure before AND after every optimization
• Profile to find hot spots; never guess
• Compiler optimization often beats manual tuning
• Code tuning is the LAST resort, not first

Core Patterns

PREREQUISITE: Only apply these patterns AFTER profiling confirms the specific code is in the <4% hot path. Applying without measurement is a skill violation.

Page Fault Loop Ordering

// BEFORE: Causes page fault on every access [ANTI-PATTERN]
for (column = 0; column < MAX_COLUMNS; column++) {
    for (row = 0; row < MAX_ROWS; row++) {
        table[row][column] = BlankTableElement();
    }
}

// AFTER: Page fault only when switching rows (up to 1000x faster)
for (row = 0; row < MAX_ROWS; row++) {
    for (column = 0; column < MAX_COLUMNS; column++) {
        table[row][column] = BlankTableElement();
    }
}

Sentinel Value in Search Loop

// BEFORE: Compound test every iteration [ANTI-PATTERN]
found = false;
i = 0;
while (!found && i < count) {
    if (item[i] == target) found = true;
    i++;
}

// AFTER: Single test per iteration (23-65% faster)
// Place sentinel past end of search range
item[count] = target;  // sentinel
i = 0;
while (item[i] != target) {
    i++;
}
if (i < count) {
    // found at position i
}

Loop Unswitching

// BEFORE: Testing invariant condition every iteration [ANTI-PATTERN]
for (i = 0; i < count; i++) {
    if (type == TYPE_A) {
        processTypeA(item[i]);
    } else {
        processTypeB(item[i]);
    }
}

// AFTER: Test once outside loop (19-28% faster)
if (type == TYPE_A) {
    for (i = 0; i < count; i++) {
        processTypeA(item[i]);
    }
} else {
    for (i = 0; i < count; i++) {
        processTypeB(item[i]);
    }
}

Strength Reduction in Expression

// BEFORE: Expensive operation [ANTI-PATTERN]
if (Math.sqrt(x) < Math.sqrt(y)) {
    // ...
}

// AFTER: Algebraically equivalent, 90-99.9% faster
if (x < y) {  // when x,y >= 0
    // ...
}

APPLIER: When to Optimize

Decision Tree (STRICT ORDER - Do NOT skip steps):

Each step is a gate. Skipping steps = wasted effort or masked problems.

1. Is the program correct and complete?
   NO  -> Make it correct first. STOP optimization.
   YES -> Continue

2. Have you measured to find the actual bottleneck?
   NO  -> Profile/​measure first. Do NOT guess.
   YES -> Continue

3. Can requirements be relaxed?
   YES -> Relax requirements. Done.
   NO  -> Continue

4. Can design/​architecture solve it?
   YES -> Fix design. Done.
   NO  -> Continue

5. Can algorithm/​data structure solve it?
   YES -> Change algorithm. Done.
   NO  -> Continue

6. Can compiler flags help?
   YES -> Enable optimizations. Measure.
   NO  -> Continue

7. Is it in the <4% that causes >50% of runtime?
   NO  -> Do NOT optimize this code. Find actual hot spot.
   YES -> PROCEED with code tuning

Code Tuning Procedure (STRICT ORDER)

1. Save working version (cannot revert without backup)
2. Make ONE change (multiple changes = unmeasurable)
3. Measure improvement (same workload, before/​after)
4. Keep if faster, revert if not (no "close enough")
5. Repeat

Technique Priority (by category)

Logic:

1. Stop testing when answer known (use break, short-circuit)
2. Order tests by frequency (most common first)
3. Substitute table lookups for complex logic
4. Use lazy evaluation

Loops:

1. Unswitch (move invariant tests outside)
2. Jam/​fuse loops operating on same range
3. Put busiest loop on inside
4. Minimize work inside loops
5. Use sentinel values for search loops
6. Unroll ONLY if measured (can be -27% in Python!)

Data:

1. Use integers instead of floating-point when possible
2. Use fewest array dimensions
3. Cache frequently computed values
4. Precompute results where practical

Expressions:

1. Initialize at compile time
2. Exploit algebraic identities
3. Use strength reduction (multiplication -> addition)
4. Eliminate common subexpressions

CHECKER: Review for Anti-Patterns

Checklist: checklists.md Output Format:

• VIOLATION: Clear anti-pattern present
• WARNING: Potential issue (needs measurement)
• PASS: No obvious performance issues

Rationalization Counters

---

Chain