Network 101

Network 101

Purpose

Configure and test common network services (HTTP, HTTPS, SNMP, SMB) for penetration testing lab environments. Enable hands-on practice with service enumeration, log analysis, and security testing against properly configured target systems.

Inputs/​Prerequisites

• Windows Server or Linux system for hosting services
• Kali Linux or similar for testing
• Administrative access to target system
• Basic networking knowledge (IP addressing, ports)
• Firewall access for port configuration

Outputs/​Deliverables

• Configured HTTP/​HTTPS web server
• SNMP service with accessible communities
• SMB file shares with various permission levels
• Captured logs for analysis
• Documented enumeration results

Core Workflow

1. Configure HTTP Server (Port 80)

Set up a basic HTTP web server for testing:

Windows IIS Setup:

1. Open IIS Manager (Internet Information Services)
2. Right-click Sites → Add Website
3. Configure site name and physical path
4. Bind to IP address and port 80

Linux Apache Setup:

# Install Apache
sudo apt update && sudo apt install apache2

# Start service
sudo systemctl start apache2
sudo systemctl enable apache2

# Create test page
echo "<html><body><h1>Test Page</​h1></​body></​html>" | sudo tee /​var/​www/​html/​index.html

# Verify service
curl http://localhost

Configure Firewall for HTTP:

# Linux (UFW)
sudo ufw allow 80/​tcp

# Windows PowerShell
New-NetFirewallRule -DisplayName "HTTP" -Direction Inbound -Protocol TCP -LocalPort 80 -Action Allow

2. Configure HTTPS Server (Port 443)

Set up secure HTTPS with SSL/​TLS:

Generate Self-Signed Certificate:

# Linux - Generate certificate
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
  -keyout /​etc/​ssl/​private/​apache-selfsigned.key \
  -out /​etc/​ssl/​certs/​apache-selfsigned.crt

# Enable SSL module
sudo a2enmod ssl
sudo systemctl restart apache2

Configure Apache for HTTPS:

# Edit SSL virtual host
sudo nano /​etc/​apache2/​sites-available/​default-ssl.conf

# Enable site
sudo a2ensite default-ssl
sudo systemctl reload apache2

Verify HTTPS Setup:

# Check port 443 is open
nmap -p 443 192.168.1.1

# Test SSL connection
openssl s_client -connect 192.168.1.1:443

# Check certificate
curl -kv https://192.168.1.1

3. Configure SNMP Service (Port 161)

Set up SNMP for enumeration practice:

Linux SNMP Setup:

# Install SNMP daemon
sudo apt install snmpd snmp

# Configure community strings
sudo nano /​etc/​snmp/​snmpd.conf

# Add these lines:
# rocommunity public
# rwcommunity private

# Restart service
sudo systemctl restart snmpd

Windows SNMP Setup:

1. Open Server Manager → Add Features
2. Select SNMP Service
3. Configure community strings in Services → SNMP Service → Properties

SNMP Enumeration Commands:

# Basic SNMP walk
snmpwalk -c public -v1 192.168.1.1

# Enumerate system info
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.1

# Get running processes
snmpwalk -c public -v1 192.168.1.1 1.3.6.1.2.1.25.4.2.1.2

# SNMP check tool
snmp-check 192.168.1.1 -c public

# Brute force community strings
onesixtyone -c /​usr/​share/​seclists/​Discovery/​SNMP/​common-snmp-community-strings.txt 192.168.1.1

4. Configure SMB Service (Port 445)

Set up SMB file shares for enumeration:

Windows SMB Share:

1. Create folder to share
2. Right-click → Properties → Sharing → Advanced Sharing
3. Enable sharing and set permissions
4. Configure NTFS permissions

Linux Samba Setup:

# Install Samba
sudo apt install samba

# Create share directory
sudo mkdir -p /​srv/​samba/​share
sudo chmod 777 /​srv/​samba/​share

# Configure Samba
sudo nano /​etc/​samba/​smb.conf

# Add share:
# [public]
#    path = /​srv/​samba/​share
#    browsable = yes
#    guest ok = yes
#    read only = no

# Restart service
sudo systemctl restart smbd

SMB Enumeration Commands:

# List shares anonymously
smbclient -L //192.168.1.1 -N

# Connect to share
smbclient //192.168.1.1/​share -N

# Enumerate with smbmap
smbmap -H 192.168.1.1

# Full enumeration
enum4linux -a 192.168.1.1

# Check for vulnerabilities
nmap --script smb-vuln* 192.168.1.1

5. Analyze Service Logs

Review logs for security analysis:

HTTP/​HTTPS Logs:

# Apache access log
sudo tail -f /​var/​log/​apache2/​access.log

# Apache error log
sudo tail -f /​var/​log/​apache2/​error.log

# Windows IIS logs
# Location: C:\inetpub\logs\LogFiles\W3SVC1\

Parse Log for Credentials:

# Search for POST requests
grep "POST" /​var/​log/​apache2/​access.log

# Extract user agents
awk '{print $12}' /​var/​log/​apache2/​access.log | sort | uniq -c

Quick Reference

Essential Ports

Service Verification Commands

# Check HTTP
curl -I http://target

# Check HTTPS
curl -kI https://target

# Check SNMP
snmpwalk -c public -v1 target

# Check SMB
smbclient -L //target -N

Common Enumeration Tools

Constraints

• Self-signed certificates trigger browser warnings
• SNMP v1/​v2c communities transmit in cleartext
• Anonymous SMB access is often disabled by default
• Firewall rules must allow inbound connections
• Lab environments should be isolated from production

Examples

Example 1: Complete HTTP Lab Setup

# Install and configure
sudo apt install apache2
sudo systemctl start apache2

# Create login page
cat << 'EOF' | sudo tee /​var/​www/​html/​login.html
<html>
<body>
<form method="POST" action="login.php">
Username: <input type="text" name="user"><br>
Password: <input type="password" name="pass"><br>
<input type="submit" value="Login">
</​form>
</​body>
</​html>
EOF

# Allow through firewall
sudo ufw allow 80/​tcp

Example 2: SNMP Testing Setup

# Quick SNMP configuration
sudo apt install snmpd
echo "rocommunity public" | sudo tee -a /​etc/​snmp/​snmpd.conf
sudo systemctl restart snmpd

# Test enumeration
snmpwalk -c public -v1 localhost

Example 3: SMB Anonymous Access

# Configure anonymous share
sudo apt install samba
sudo mkdir /​srv/​samba/​anonymous
sudo chmod 777 /​srv/​samba/​anonymous

# Test access
smbclient //localhost/​anonymous -N

Troubleshooting

When to Use

This skill is applicable to execute the workflow or actions described in the overview.