Downloads · 30 days
8
40% of all-time downloads
so100-act-s1000
tonghuiwang123/so100-act-s1000
so100-act-s1000 is a robotics model from tonghuiwang123. Use it for the robotics task on the model card, and read the license before you ship it in a product. It is set up for lerobot.
LeRobot policy for SO-ARM100 / SO100, task: Grab the white cube to the white cup Trained on tonghuiwang123/test10 (2 cameras @1280x720, 30fps).
All-time downloads
20
Public
Parameters
51.7M
207 MB on disk
Likes
0
Public
Repo makeup
Click a slice to open those files.
.safetensors207 MB · 100%
At a glance
- Task
- Robotics
- Library
- lerobot
- Access
- Public
- Created
- Aug 26, 2026
- Updated
- Aug 26, 2026
- SHA
- a1e8bf83
Model card
From the Hugging Face model README
so100-act-s1000
LeRobot policy for SO-ARM100 / SO100, task: Grab the white cube to the white cup
Trained on tonghuiwang123/test10 (2 cameras @1280x720, 30fps).
相机对照（顺序不能错，错了不报错但表现会莫名变差）
| 物理位置 | 设备 | 本模型要求的 key |
|---|---|---|
| 顶部 (top-down) | /dev/video2 | front |
| 腕部 (wrist) | /dev/video4 | side |
建议把
/dev/videoN换成/dev/v4l/by-id/...的稳定路径， 因为 videoN 编号在重插 USB / 重启后会漂移。
真机部署
lerobot-record \
--robot.type=so100_follower --robot.port=/dev/ttyACM0 \
--robot.id=my_awesome_follower_arm \
--robot.cameras="{
front: {type: opencv, index_or_path: /dev/video2, width: 1280, height: 720, fps: 30},
side: {type: opencv, index_or_path: /dev/video4, width: 1280, height: 720, fps: 30},
}" \
--dataset.repo_id=tonghuiwang123/eval_so100-act-s1000 \
--dataset.single_task="Grab the white cube to the white cup" \
--policy.n_action_steps=15 \
--policy.path=tonghuiwang123/so100-act-s1000
分辨率必须 1280x720，与训练数据一致。
推理开销
| 模型族 | 显存 | 单次推理 |
|---|---|---|
| ACT | 0.70 GB | ~56 ms (720p x2) |
| SmolVLA | 1.03 GB | - |
| Pi0 | 9.43 GB | - |
| Pi0.5 | 9.90 GB | - |
ACT 注意：默认 n_action_steps=100 会开环执行 3.3 秒，期间腕部相机画面全部被丢弃。
若出现「朝目标动但抓不准」，优先调小到 15（约 0.5 秒闭环一次），无需重训。
- Task
- Robotics
- Library
- lerobot
- Created
- Aug 26, 2026
- Updated
- Aug 26, 2026