FlatQuant

FlatQuant: Flatness Matters for LLM Quantization

This repository contains the model zoo of FlatQuant: Flatness Matters for LLM Quantization.

The official code can be found at https://github.com/ruikangliu/FlatQuant.

---

FlatQuant leverages Fast and Learnable Affine Transformations tailored for each linear layer to alleviate outliers in LLMs. Additionally, as indicated by the name, it also achieves pretty flat weights and activations that are friendly to quantization. FlatQuant significantly enhances the quantization accuracy under a low-bit quantization setting (i.e., W4A4) while introducing little inference overhead, which may help promote the deployment of W4A4-quantized LLMs.

News 🔥

• [2025/05] We now support fake quantized inference in vLLM.
• [2025/05] FlatQuant for DeepSeek V3/R1 is now available!
• [2025/05] Our paper has been accepted to ICML 2025! 🎉
• [2024/11] Pre-trained transformation matrices of FlatQuant are now available at modelzoo.
• [2024/10] FlatQuant is publicly released! Check our paper here.

Contents

• Preparations
• Usage
• Model Zoo
• Results
• Acknowledgements
• References

Preparations

Installation

conda create -n flatquant python=3.10 -y
conda activate flatquant
pip install -r requirements.txt && pip install -e . && pip install triton==3.0.0

Note: To run models like LLaMA-3.1 or Qwen-2.5, we use transformers==4.45.0 instead.

Data Preparation

Download datasets in ./datasets.

Calibration set or PPL evaluation

Commonsense QA evaluation

For QA evaluation, we use local config files to specify the paths to local datasets. First, copy the dataset config files under ~/anaconda3/envs/flatquant/lib/python3.10/site-packages/lm_eval/tasks to ./datasets/lm_eval_configs/tasks. Next, modify the config item dataset_path in each QA dataset's config file to the local directory listed in the following table.

Model Preparation

Download models in ./modelzoo.

Usage

Calibration

We provide full script to run FlatQuant in ./scripts/. We use LLaMa-3-8B as an example here:

1. Weight-Activation-KV Cache Quantization

# W4A4KV4
python ./main.py \
    --model ./modelzoo/llama-3/llama-3-8b \
    --w_bits 4 --a_bits 4 \
    --k_bits 4 --k_asym --k_groupsize 128 \
    --v_bits 4 --v_asym --v_groupsize 128 \
    --cali_bsz 4 --epoch 15 --flat_lr 5e-3 \
    --lwc --lac --cali_trans --add_diag \
    --output_dir ./outputs --save_matrix \
    --lm_eval --lm_eval_batch_size 16

1. Weight-Only Quantization

# W4A16
python ./main.py \
    --model ./modelzoo/llama-3/llama-3-8b \
    --w_bits 4 \
    --cali_bsz 4 --epoch 15 --flat_lr 5e-3 \
    --lwc --lac --cali_trans --add_diag \
    --output_dir ./outputs --exp_name wonly --save_matrix \
    --lm_eval --lm_eval_batch_size 16

1. Reproduce Evaluation Results of Our Paper

   1) Download the pretrained FlatQuant parameters you want through modelzoo.

   2) Inference with --reload_matrix and --matrix_path PATH_TO_XXX, take LLaMa-3-8B with W4A4KV4 quantization as an example:

python ./main.py \
    --model ./modelzoo/llama-3/llama-3-8b \
    --w_bits 4 --a_bits 4 \
    --k_bits 4 --k_asym --k_groupsize 128 \
    --v_bits 4 --v_asym --v_groupsize 128 \
    --cali_bsz 4 --epoch 15 --flat_lr 5e-3 \
    --lwc --lac --cali_trans --add_diag \
    --output_dir ./outputs --save_matrix \
    --lm_eval --lm_eval_batch_size 16 \
    --reload_matrix --matrix_path PATH_TO_XXX 

DeepSeek V3/R1 Scripts

For scripts related to DeepSeek V3/R1, see scripts/deepseek/. Make sure to use the package versions specified in the DeepSeek V3 repository.

Note: We observed that the last two layers of DeepSeek V3/R1 are difficult to quantize effectively.
Use the flag --v3_not_last to skip calibration for these layers during quantization.

Inference Latency

To measure the speedup of FlatQuant and our efficient kernel, run the corresponding benchmark commands provided below:

# Run end-to-end latency benchmark
python ./benchmarks/layer_benchmark.py

# Run kernel latency benchmark
python ./benchmarks/kernel_benchmark.py

# Run linear layer latency benchmark
python ./benchmarks/qlinear_benchmark.py

# Run attention latency benchmark
python ./benchmarks/qattention_benchmark.py

Apply to other models

To apply FlatQuant in your own models, some modifications are required in the forward pass of the model, particularly within the Attention and MLP modules. You can refer to flatquant/model_tools for our implementations of LLaMA2, LLaMA3, LLaMA3.1, and Qwen2.5.

Efficient Kernel

The detailed implementation of our efficient kernel can be found in deploy/kernels/kron_matmul.py and deploy/kernels/block_matmul.py.

Plot Flatness

Run the following command to plot the flatness of weights and activations after different pre-quantization transformations including FlatQuant, Hdamard transformation and per-channel scaling. We use LLaMa-3-8B as an example here. The flag --matrix_path is used to specify the path to the pre-trained transformation matrices of FlatQuant.

python ./plot_flatness.py \
    --model ./modelzoo/llama-3/llama-3-8b \
    --distribute_model --add_diag \
    --matrix_path ./modelzoo/flatquant/llama-3-8b/w4a4

Fake Quantization with vLLM

To enable fake-quantized inference with FlatQuant in a custom vLLM build, register the quantized models in your inference.py by adding:

from vllm_custom.model_executor.fake_quantized_models.registry import register_fake_quantized_models
register_fake_quantized_models()  # Register fake-quantized models in vLLM

All code related to fake quantization is located in vllm_custom/.

Model Zoo

We provide the pre-trained transformation matrices of FlatQuant at https://huggingface.co/ruikangliu/FlatQuant. The supported models are listed in the following table. For detailed implementations of each model, please refer to the code in ./flatquant/model_tools.

Results

Accuracy Results

Table 1: WikiText-2 perplexity of 4-bit weight & acitvation quantized LLaMA models.

Table 2: C4 perplexity of 4-bit weight & acitvation quantized LLaMA models.

Table 3: Zero-shot QA task results of 4-bit weight & activation quantized LLaMA models.

Table 4: Results of 4-bit weight & activation quantized Qwen-2.5-Instruct models.

Table 5: Results of 4-bit weight & activation quantized DeepSeek V3/R1 models.

Latency Results

Table 6: Prefill speedup of LLaMA-2-7B model across different batch sizes on one RTX3090 GPU. We decode 256 tokens after the prefill on a sequence length of 2048.

Table 7: Decoding speedup of LLaMA-2-7B model across different batch sizes on one RTX3090 GPU. We decode 256 tokens after the prefill on a sequence length of 2048.

Acknowledgements

This project is based on the work of the following projects:

• QuaRot
• OmniQuant
• IntactKV

We are grateful for the contributions provided by these projects.

References

If you find FlatQuant helpful, please cite our paper:

@article{sun2024flatquant,
  title={FlatQuant: Flatness Matters for LLM Quantization},
  author={Sun, Yuxuan and Liu, Ruikang and Bai, Haoli and Bao, Han and Zhao, Kang and Li, Yuening and Hu, Jiaxin and Yu, Xianzhi and Hou, Lu and Yuan, Chun and others},
  journal={arXiv preprint arXiv:2410.09426},
  year={2024}
}