Qwen3-1.7B-W8A8

    ██╗    ██╗ █████╗   █████╗  █████╗ 
    ██║    ██║██╔══██╗ ██╔══██╗██╔══██╗
    ██║ █╗ ██║╚█████╔╝ ███████║╚█████╔╝
    ██║███╗██║██╔══██╗ ██╔══██║██╔══██╗
    ╚███╔███╔╝╚█████╔╝ ██║  ██║╚█████╔╝
     ╚══╝╚══╝  ╚════╝  ╚═╝  ╚═╝ ╚════╝ 
        🗜️ COMPRESSED & OPTIMIZED 🚀

Qwen3-1.7B - W8A8 Quantized

W8A8 (8-bit weights and activations) quantized version of Qwen/Qwen3-1.7B using LLM-Compressor.

• 🗜️ Memory: ~50% reduction vs FP16
• 🚀 Speed: Faster inference on supported hardware
• 🔗 Original model: https://huggingface.co/Qwen/Qwen3-1.7B
• 🏗️ Recommended architectures: Ampere and older

<details> <summary>Click to view compression config</summary>

from datasets import load_dataset
from transformers import AutoModelForCausalLM, AutoTokenizer

from llmcompressor.modifiers.quantization import GPTQModifier
from llmcompressor.modifiers.smoothquant import SmoothQuantModifier
from llmcompressor.transformers import oneshot
from llmcompressor.utils import dispatch_for_generation

# Select model and load it.
model_id = "Qwen/Qwen3-1.7B"
model = AutoModelForCausalLM.from_pretrained(
    model_id,
    torch_dtype="auto",
    device_map="auto",
    low_cpu_mem_usage=True,
    offload_folder="./offload_tmp",  # Add offload directory
    max_memory={0: "22GB", 1: "22GB", "cpu": "64GB"},
)
tokenizer = AutoTokenizer.from_pretrained(model_id)

# Select calibration dataset.
DATASET_ID = "HuggingFaceH4/ultrachat_200k"
DATASET_SPLIT = "train_sft"

# Select number of samples. 512 samples is a good place to start.
# Increasing the number of samples can improve accuracy.
NUM_CALIBRATION_SAMPLES = 512
MAX_SEQUENCE_LENGTH = 2048

# Load dataset and preprocess.
ds = load_dataset(DATASET_ID, split=f"{DATASET_SPLIT}[:{NUM_CALIBRATION_SAMPLES}]")
ds = ds.shuffle(seed=42)


def preprocess(example):
    return {
        "text": tokenizer.apply_chat_template(
            example["messages"],
            tokenize=False,
        )
    }


ds = ds.map(preprocess)


# Tokenize inputs.
def tokenize(sample):
    return tokenizer(
        sample["text"],
        padding=False,
        max_length=MAX_SEQUENCE_LENGTH,
        truncation=True,
        add_special_tokens=False,
    )


ds = ds.map(tokenize, remove_columns=ds.column_names)

# Configure the quantization algorithm to run.
#   * apply SmoothQuant to make the activations easier to quantize
#   * quantize the weights to int8 with GPTQ (static per channel)
#   * quantize the activations to int8 (dynamic per token)
recipe = [
    SmoothQuantModifier(smoothing_strength=0.8),
    GPTQModifier(targets="Linear", scheme="W8A8", ignore=["lm_head"]),
]
# Apply algorithms.
oneshot(
    model=model,
    dataset=ds,
    recipe=recipe,
    max_seq_length=MAX_SEQUENCE_LENGTH,
    num_calibration_samples=NUM_CALIBRATION_SAMPLES,
    output_dir="./Qwen3-1.7B-W8A8",  # Add this line
)


# Save to disk compressed.
SAVE_DIR = model_id.rstrip("/").split("/")[-1] + "-W8A8"
model.save_pretrained(SAVE_DIR, save_compressed=True)
tokenizer.save_pretrained(SAVE_DIR)

</details>

---

📄 Original Model README

Qwen3-1.7B

<a href="https://chat.qwen.ai/" target="_blank" style="margin: 2px;"> <img alt="Chat" src="https://img.shields.io/badge/%F0%9F%92%9C%EF%B8%8F%20Qwen%20Chat%20-536af5" style="display: inline-block; vertical-align: middle;"/> </a>

Qwen3 Highlights

Qwen3 is the latest generation of large language models in Qwen series, offering a comprehensive suite of dense and mixture-of-experts (MoE) models. Built upon extensive training, Qwen3 delivers groundbreaking advancements in reasoning, instruction-following, agent capabilities, and multilingual support, with the following key features:

• Uniquely support of seamless switching between thinking mode (for complex logical reasoning, math, and coding) and non-thinking mode (for efficient, general-purpose dialogue) within single model, ensuring optimal performance across various scenarios.
• Significantly enhancement in its reasoning capabilities, surpassing previous QwQ (in thinking mode) and Qwen2.5 instruct models (in non-thinking mode) on mathematics, code generation, and commonsense logical reasoning.
• Superior human preference alignment, excelling in creative writing, role-playing, multi-turn dialogues, and instruction following, to deliver a more natural, engaging, and immersive conversational experience.
• Expertise in agent capabilities, enabling precise integration with external tools in both thinking and unthinking modes and achieving leading performance among open-source models in complex agent-based tasks.
• Support of 100+ languages and dialects with strong capabilities for multilingual instruction following and translation.

Model Overview

Qwen3-1.7B has the following features:

• Type: Causal Language Models
• Training Stage: Pretraining & Post-training
• Number of Parameters: 1.7B
• Number of Paramaters (Non-Embedding): 1.4B
• Number of Layers: 28
• Number of Attention Heads (GQA): 16 for Q and 8 for KV
• Context Length: 32,768

For more details, including benchmark evaluation, hardware requirements, and inference performance, please refer to our blog, GitHub, and Documentation.

[!TIP] If you encounter significant endless repetitions, please refer to the Best Practices section for optimal sampling parameters, and set the presence_penalty to 1.5.

Quickstart

The code of Qwen3 has been in the latest Hugging Face transformers and we advise you to use the latest version of transformers.

With transformers<4.51.0, you will encounter the following error:

KeyError: 'qwen3'

The following contains a code snippet illustrating how to use the model generate content based on given inputs.

from transformers import AutoModelForCausalLM, AutoTokenizer

model_name = "Qwen/Qwen3-1.7B"

# load the tokenizer and the model
tokenizer = AutoTokenizer.from_pretrained(model_name)
model = AutoModelForCausalLM.from_pretrained(
    model_name,
    torch_dtype="auto",
    device_map="auto"
)

# prepare the model input
prompt = "Give me a short introduction to large language model."
messages = [
    {"role": "user", "content": prompt}
]
text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True,
    enable_thinking=True # Switches between thinking and non-thinking modes. Default is True.
)
model_inputs = tokenizer([text], return_tensors="pt").to(model.device)

# conduct text completion
generated_ids = model.generate(
    **model_inputs,
    max_new_tokens=32768
)
output_ids = generated_ids[0][len(model_inputs.input_ids[0]):].tolist() 

# parsing thinking content
try:
    # rindex finding 151668 (</think>)
    index = len(output_ids) - output_ids[::-1].index(151668)
except ValueError:
    index = 0

thinking_content = tokenizer.decode(output_ids[:index], skip_special_tokens=True).strip("\n")
content = tokenizer.decode(output_ids[index:], skip_special_tokens=True).strip("\n")

print("thinking content:", thinking_content)
print("content:", content)

For deployment, you can use sglang>=0.4.6.post1 or vllm>=0.8.5 or to create an OpenAI-compatible API endpoint:

• SGLang:

  python -m sglang.launch_server --model-path Qwen/Qwen3-1.7B --reasoning-parser qwen3
  

• vLLM:

  vllm serve Qwen/Qwen3-1.7B --enable-reasoning --reasoning-parser deepseek_r1
  

For local use, applications such as Ollama, LMStudio, MLX-LM, llama.cpp, and KTransformers have also supported Qwen3.

Switching Between Thinking and Non-Thinking Mode

[!TIP] The enable_thinking switch is also available in APIs created by SGLang and vLLM. Please refer to our documentation for SGLang and vLLM users.

enable_thinking=True

By default, Qwen3 has thinking capabilities enabled, similar to QwQ-32B. This means the model will use its reasoning abilities to enhance the quality of generated responses. For example, when explicitly setting enable_thinking=True or leaving it as the default value in tokenizer.apply_chat_template, the model will engage its thinking mode.

text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True,
    enable_thinking=True  # True is the default value for enable_thinking
)

In this mode, the model will generate think content wrapped in a <think>...</think> block, followed by the final response.

[!NOTE] For thinking mode, use Temperature=0.6, TopP=0.95, TopK=20, and MinP=0 (the default setting in generation_config.json). DO NOT use greedy decoding, as it can lead to performance degradation and endless repetitions. For more detailed guidance, please refer to the Best Practices section.

enable_thinking=False

We provide a hard switch to strictly disable the model's thinking behavior, aligning its functionality with the previous Qwen2.5-Instruct models. This mode is particularly useful in scenarios where disabling thinking is essential for enhancing efficiency.

text = tokenizer.apply_chat_template(
    messages,
    tokenize=False,
    add_generation_prompt=True,
    enable_thinking=False  # Setting enable_thinking=False disables thinking mode
)

In this mode, the model will not generate any think content and will not include a <think>...</think> block.

[!NOTE] For non-thinking mode, we suggest using Temperature=0.7, TopP=0.8, TopK=20, and MinP=0. For more detailed guidance, please refer to the Best Practices section.

Advanced Usage: Switching Between Thinking and Non-Thinking Modes via User Input

We provide a soft switch mechanism that allows users to dynamically control the model's behavior when enable_thinking=True. Specifically, you can add /think and /no_think to user prompts or system messages to switch the model's thinking mode from turn to turn. The model will follow the most recent instruction in multi-turn conversations.

Here is an example of a multi-turn conversation:

from transformers import AutoModelForCausalLM, AutoTokenizer

class QwenChatbot:
    def __init__(self, model_name="Qwen/Qwen3-1.7B"):
        self.tokenizer = AutoTokenizer.from_pretrained(model_name)
        self.model = AutoModelForCausalLM.from_pretrained(model_name)
        self.history = []

    def generate_response(self, user_input):
        messages = self.history + [{"role": "user", "content": user_input}]

        text = self.tokenizer.apply_chat_template(
            messages,
            tokenize=False,
            add_generation_prompt=True
        )

        inputs = self.tokenizer(text, return_tensors="pt")
        response_ids = self.model.generate(**inputs, max_new_tokens=32768)[0][len(inputs.input_ids[0]):].tolist()
        response = self.tokenizer.decode(response_ids, skip_special_tokens=True)

        # Update history
        self.history.append({"role": "user", "content": user_input})
        self.history.append({"role": "assistant", "content": response})

        return response

# Example Usage
if __name__ == "__main__":
    chatbot = QwenChatbot()

    # First input (without /think or /no_think tags, thinking mode is enabled by default)
    user_input_1 = "How many r's in strawberries?"
    print(f"User: {user_input_1}")
    response_1 = chatbot.generate_response(user_input_1)
    print(f"Bot: {response_1}")
    print("----------------------")

    # Second input with /no_think
    user_input_2 = "Then, how many r's in blueberries? /no_think"
    print(f"User: {user_input_2}")
    response_2 = chatbot.generate_response(user_input_2)
    print(f"Bot: {response_2}") 
    print("----------------------")

    # Third input with /think
    user_input_3 = "Really? /think"
    print(f"User: {user_input_3}")
    response_3 = chatbot.generate_response(user_input_3)
    print(f"Bot: {response_3}")

[!NOTE] For API compatibility, when enable_thinking=True, regardless of whether the user uses /think or /no_think, the model will always output a block wrapped in <think>...</think>. However, the content inside this block may be empty if thinking is disabled. When enable_thinking=False, the soft switches are not valid. Regardless of any /think or /no_think tags input by the user, the model will not generate think content and will not include a <think>...</think> block.

Agentic Use

Qwen3 excels in tool calling capabilities. We recommend using Qwen-Agent to make the best use of agentic ability of Qwen3. Qwen-Agent encapsulates tool-calling templates and tool-calling parsers internally, greatly reducing coding complexity.

To define the available tools, you can use the MCP configuration file, use the integrated tool of Qwen-Agent, or integrate other tools by yourself.

from qwen_agent.agents import Assistant

# Define LLM
llm_cfg = {
    'model': 'Qwen3-1.7B',

    # Use the endpoint provided by Alibaba Model Studio:
    # 'model_type': 'qwen_dashscope',
    # 'api_key': os.getenv('DASHSCOPE_API_KEY'),

    # Use a custom endpoint compatible with OpenAI API:
    'model_server': 'http://localhost:8000/v1',  # api_base
    'api_key': 'EMPTY',

    # Other parameters:
    # 'generate_cfg': {
    #         # Add: When the response content is `<think>this is the thought</think>this is the answer;
    #         # Do not add: When the response has been separated by reasoning_content and content.
    #         'thought_in_content': True,
    #     },
}

# Define Tools
tools = [
    {'mcpServers': {  # You can specify the MCP configuration file
            'time': {
                'command': 'uvx',
                'args': ['mcp-server-time', '--local-timezone=Asia/Shanghai']
            },
            "fetch": {
                "command": "uvx",
                "args": ["mcp-server-fetch"]
            }
        }
    },
  'code_interpreter',  # Built-in tools
]

# Define Agent
bot = Assistant(llm=llm_cfg, function_list=tools)

# Streaming generation
messages = [{'role': 'user', 'content': 'https://qwenlm.github.io/blog/ Introduce the latest developments of Qwen'}]
for responses in bot.run(messages=messages):
    pass
print(responses)

Best Practices

To achieve optimal performance, we recommend the following settings:

1. Sampling Parameters:

   • For thinking mode (enable_thinking=True), use Temperature=0.6, TopP=0.95, TopK=20, and MinP=0. DO NOT use greedy decoding, as it can lead to performance degradation and endless repetitions.
   • For non-thinking mode (enable_thinking=False), we suggest using Temperature=0.7, TopP=0.8, TopK=20, and MinP=0.
   • For supported frameworks, you can adjust the presence_penalty parameter between 0 and 2 to reduce endless repetitions. However, using a higher value may occasionally result in language mixing and a slight decrease in model performance.

2. Adequate Output Length: We recommend using an output length of 32,768 tokens for most queries. For benchmarking on highly complex problems, such as those found in math and programming competitions, we suggest setting the max output length to 38,912 tokens. This provides the model with sufficient space to generate detailed and comprehensive responses, thereby enhancing its overall performance.

3. Standardize Output Format: We recommend using prompts to standardize model outputs when benchmarking.

   • Math Problems: Include "Please reason step by step, and put your final answer within \boxed{}." in the prompt.
   • Multiple-Choice Questions: Add the following JSON structure to the prompt to standardize responses: "Please show your choice in the answer field with only the choice letter, e.g., "answer": "C"."

4. No Thinking Content in History: In multi-turn conversations, the historical model output should only include the final output part and does not need to include the thinking content. It is implemented in the provided chat template in Jinja2. However, for frameworks that do not directly use the Jinja2 chat template, it is up to the developers to ensure that the best practice is followed.

Citation

If you find our work helpful, feel free to give us a cite.

@misc{qwen3technicalreport,
      title={Qwen3 Technical Report}, 
      author={Qwen Team},
      year={2025},
      eprint={2505.09388},
      archivePrefix={arXiv},
      primaryClass={cs.CL},
      url={https://arxiv.org/abs/2505.09388}, 
}