Qwen3.8-27B-ROCmFP4-STRIX-MTP-GGUF

Qwen3.8-27B — ROCmFP4 for AMD Strix Halo (gfx1151)

New file (2026-10-25): Qwen3.8-27B-Q4_0_ROCMFP4_STRIX-imatrix-headQ6K.gguf

The ROCmFP4 files already in this repository (STRIX, STRIX_LEAN and FAST) are built without importance weighting. This file keeps the STRIX recipe but adds importance-matrix weighting from an agentic calibration imatrix, and raises the output head and the token embedding to Q6_K. The numbers below pair it with the DFlash2 draft head rather than the in-repo MTP head.

How it was built:

• Tool: gufo-quant, recipe STRIX, weighted with the agentic imatrix.
• Tensor overrides: output.weight and token_embd.weight at Q6_K; census 866 tensors (82 at type 100, 421 at type 101).
• The exact command line was not recorded.

Measured on Super ROC (AMD Ryzen AI Max+ 395 (Radeon 8060S, gfx1151), 128 GB, ROCm 7.2.4; one request at a time, temperature 0, cold prompt cache):

Quality (measured with Super ROC's perplexity tool on a 6K-token long-text corpus, context 4096, and against BF16 logits on wikitext-2, 16 x 512 tokens): perplexity 5.2830, KL divergence 0.033983, top-1 agreement 91.078 %. The stock Unsloth UD-Q4_K_XL file measures 5.1989, 0.006348 and 95.858 % on the same tests.

Run it with Super ROC (https://github.com/kingjones30/superroc):

superroc serve --host 127.0.0.1 --port 8080 llm -m /path/to/Qwen3.8-27B-Q4_0_ROCMFP4_STRIX-imatrix-headQ6K.gguf --served-model-name qwen3.8-27b --context 32768 --think off --speculative dflash2 --dflash-model /path/to/Qwen3.8-27B-DFlash2-Q4_K_M.gguf

<!-- LEAD-CLAIM:START -->

✅ the only public ROCmFP4 build of this model published with measured perplexity and an MTP tuning curve

Checked 2026-08-14 against all four other public ROCmFP4/ROCmFPX builds of Qwen3.8-27B. None publishes perplexity (one lists it as "TBD") and none publishes a --spec-draft-n-max sweep. Card-content comparison only — no third-party build was run or benchmarked here.

<!-- LEAD-CLAIM:END -->

Three ROCmFP4 quantisations of Qwen3.8-27B for AMD Ryzen AI Max+ 395 / Radeon 8060S / gfx1151, bundled with the multi-token-prediction draft head. ROCmFP4 is a runtime tensor format that exists only in the ROCmFPX fork of llama.cpp.

The headline here is not the quantisation on its own — it is what the MTP head is worth once it is tuned, which turns out to be more than the quantisation itself.

Why this build?

• 2.83× the decode of a standard Q4_K_M on the same box, same binary, same flags — 30.30 vs 10.70 tok/s, once the MTP head is tuned
• Perplexity parity at 22% smaller: 5.8877 vs 5.8926, a 0.08% difference against ±1.2% error bars. No measurable quality cost for the missing bits.
• The MTP depth curve is published. llama.cpp's default --spec-draft-n-max is 16, which on this model gives roughly half the achievable throughput. The optimum is 3–4.
• Prefill improves rather than regressing (+3.8%), which is unusual for a ROCmFP4 build
• Cold load in 6.3 s
• Every number below came off a quiesced machine with a 0.08% measured noise floor

Which file should I use?

Start with STRIX. All three variants measured identical in speed, so there is no speed reason to take fewer bits.

Ryzen AI Max+ 395, ROCm 7.2.4, ctx 65536, batch 1, greedy (temp 0, top_k 1), ignore_eos so every arm generates exactly 256 tokens, unique nonce per request and cache_prompt: false so the prefix cache never serves a hit (cached_tokens = 0 verified on every run). Median of 3–5 reps.

The variants are speed-equivalent, and that is the finding. 13.44 / 13.46 / 13.46 tok/s is a 0.15% spread — smaller than most measurement noise, and this instrument's noise floor is 0.08%. The ftype names imply a size/speed trade that does not materialise on this architecture: decode here is not purely weight-bandwidth-bound, so shaving 3% off the file buys nothing. Take the bits.

FAST (103) is therefore dominated on this model — the same speed as STRIX but the highest perplexity of the three, and the only one above the Q4_K_M reference. It is published for completeness and for anyone who wants the smallest file, not because it is a good default. (On other architectures FAST genuinely is faster; on this one it is not.)

STRIX and STRIX_LEAN are indistinguishable in perplexity (5.8877 vs 5.8871, ±0.068) and that gap should not be read as ranking them — STRIX is recommended on bit-count. Note also that perplexity measures next-token prediction on prose; it is not a proxy for code-execution correctness, where the extra bits in STRIX have mattered on other models.

ROCmFP4-BASE (ftype 100) is not published here: it is larger and, on every axis measured, not better.

Quick start

hf download kingjones777/Qwen3.8-27B-ROCmFP4-STRIX-MTP-GGUF --local-dir qwen38

llama-server \
  -m qwen38/Qwen3.8-27B-Q4_0_ROCMFP4_STRIX.gguf \
  --spec-type draft-mtp \
  --model-draft qwen38/mtp-Qwen3.8-27B-Q4_0.gguf \
  --spec-draft-ngl 99 --spec-draft-device ROCm0 \
  --spec-draft-n-max 4 --spec-draft-n-min 0 --spec-draft-p-min 0.0 \
  -ngl 999 -fa on -dio --jinja -fit off --parallel 1 -dev ROCm0 \
  -c 65536 --host 127.0.0.1 --port 8080

The ROCm environment prefix is mandatory on a machine that also has a Vulkan llama.cpp build, to avoid a soname clash:

env LD_LIBRARY_PATH=/path/to/ROCmFPX/build/bin:/opt/rocm/lib \
    HSA_OVERRIDE_GFX_VERSION=11.5.1 GGML_HIP_ENABLE_UNIFIED_MEMORY=1 llama-server ...

Requires a llama.cpp built with ROCmFP4 support (ggml types 100–106). Stock llama.cpp rejects these tensor types.

Four flags that matter more than which file you pick

-dio is also worth setting: it cold-loads the 13.7 GiB file in 6.3 s.

⚠️ If the MTP draft command crashes on your build

The separate-model draft-mtp path has known bugs in the legacy charlie12345/ROCmFPX line — reported on Windows 11 / gfx1151 / HIP SDK 7.2 (five stacked bugs, ending in an h-row width mismatch in the draft's embedding buffer).

Fix: build the official repo instead — no patches needed.

git clone https://github.com/ROCmFPX/ROCmFPX.git

The MTP path was reworked there (unified n_embd_out row widths, t_h_nextn reset in llm_graph_result::reset(), ctx_other wired centrally), which covers the whole chain. Reported and verified on that configuration: 24–31 tok/s, coherent output, tool calling working. Legacy-line patch: PR #109.

Linux builds on the legacy line are not known to be affected.

Speculative decoding (MTP)

Qwen3.8-27B ships a multi-token-prediction head — nextn_predict_layers = 1, published separately by ggml-org as an 18-tensor draft model (block_count = 65: the 64 base layers plus one nextn layer, with its own embeddings and output head). The quants in this repository contain the 64 base layers only; the head is a separate --model-draft file and is bundled here.

Classic rise / knee / decline: past n-max 4 the draft head's cost grows linearly while acceptance compounds downward, and wasted draft work dominates.

⚠️ Use the Q4_0 draft head, not Q8_0. The head's per-step cost is dominated by its output projection over a 248K-token vocabulary, so the cheaper head is faster end to end at equal or better acceptance — and the advantage widens with depth: +6.0% at n-max 1, +10.2% at n-max 2. Both are bundled so you can check this yourself.

A faster path exists — external sidecar + custom build (~45 tok/s)

The MTP numbers above are what this repository's own files do under a ROCmFPX build. A different combination measures ~50 % faster, at the cost of two things this repo does not ship:

At ~21k context the same config sustains 32.3 tok/s with full-length generations.

Verified independently at 9 reps/workload: 0 truncations in 36 generations, every one reaching the full 400 tokens. The mechanism is acceptance — adaptive draft length holds 0.95+ where fixed n settles around 0.54.

What you need beyond this repo:

1. The Qwen3.8-27B-Q4_0_ROCMFP4_FAST.gguf target — already here.
2. A DFlash2 draft sidecar, third-party: agentionai/Qwen3.8-27B-DFlash2-ROCmFP4-FAST-GGUF (0.96 GiB, derived from z-lab/Qwen3.8-27B-DFlash2). Not our work — credit to those authors.
3. A source build of LaurentZuijdwijk/llama.cpp, which adds --spec-draft-adaptive. Its prebuilt Linux asset did not run on our box (OPENSSL_3.3.0 not found, GLIBC_2.43 not found against OpenSSL 3.0.13 / glibc 2.39) — build it.

llama-server \
  -m Qwen3.8-27B-Q4_0_ROCMFP4_FAST.gguf \
  -md Qwen3.8-27B-DFlash2-Q4_0_ROCMFP4_FAST.gguf \
  --spec-type draft-dflash --spec-draft-adaptive \
  --spec-draft-n-min 3 --spec-draft-n-max 7 --spec-draft-ngl 99 \
  -ngl 999 -fa on --no-mmap -fit off -b 2048 -ub 1024 -t 16 -c 32768

⚠️ Two flags are load-bearing — omit either and it breaks

--spec-draft-p-min 0.10 — this build defaults to 0.00, i.e. no confidence gate on the draft. Without it a low-probability EOS proposed at position 0 is accepted unchallenged and the request returns exactly 1 token, empty, with no error and /health still 200. We measured 6/28 such failures ungated at short context, and every request failing at ~21k context. With the gate: 0/40 truncations shallow and full-length generation at 21k. It costs nothing — 45.61 vs 45.63 tok/s.

--chat-template-file (the model's own template, extractable from the GGUF's tokenizer.chat_template) — without it this build does not render tool definitions and the model replies "I don't have any weather tools available". With it: finish_reason: tool_calls.

Backend note: this path runs on Vulkan. That contradicts our own earlier finding that Vulkan loses on this model and cannot do MTP — true of the ROCmFPX Vulkan backend, not of this fork's.

MTP costs about 6% of prefill (326 → 293 tok/s at 8K). That is the honest trade against ~2.2× decode.

For scale: the memory-bandwidth ceiling for a dense 27B at ~13.7 GiB on this hardware is roughly 18.6 tok/s. Speculative decoding clears it because several tokens are produced per weight read. This is a dense model — all 27B parameters are read on every token — which is why the ceiling is low and why MTP matters so much more here than it would on a sparse MoE.

Tool calling

7/7, and 7/7 again with thinking enabled. Run against this build through llama-swap, scored on whether llama.cpp populates native tool_calls — raw XML appearing in content counts as a failure, since that is the known breakage when the parser does not match the template's format.

⭐ Tool calling and reasoning are not mutually exclusive on this model. Both arms scored 7/7, so you can run tools with reasoning_effort active — no need to disable thinking for agent work.

⭐ Parallel calls work. This is worth calling out because it is a common failure point: several open-weight models emit only the first call when asked for two in one turn. This one returns both.

Requires --jinja. The template emits the XML-style Qwen3-Coder tool format (<tool_call><function=name><parameter=arg>…), and llama.cpp parses it into native tool_calls — verified with nested objects surviving as real JSON objects rather than flattened strings.

Raw example (nested object, as returned):

{"name": "book_flight",
 "arguments": {"passenger": {"name": "Alice Smith", "age": 34},
               "route": "LHR-JFK", "cabin": "business"}}

Vision

Works, and is verified for spatial correctness rather than plausible-sounding output. A four-quadrant colour image is scored on whether each colour lands in the right corner — a misapplied attention mask names colours confidently but places them wrongly, so this distinguishes a working projector from a fluent-but-broken one.

llama-server -m Qwen3.8-27B-Q4_0_ROCMFP4_STRIX.gguf \
  --mmproj mmproj-Qwen3.8-27B-BF16.gguf \
  -ngl 999 -fa on -dio --jinja -c 16384

Vision does not require -fa off on this model. Both settings scored 4/4, so text and images can be served from one endpoint with flash attention enabled — there is no accuracy-versus-speed split to manage here.

Architecture note

Qwen3.8-27B is dense with hybrid attention: 64 layers, full_attention_interval = 4, so 16 full-attention layers and 48 linear/SSM layers.

Two practical consequences:

• KV cache is cheap. Only 16 of 64 layers grow with context, so decode barely decays with length — 13.46 tok/s at 8K versus 12.58 at 32K, a 6.5% drop over 4× the context.
• Prompt caching does not work. llama.cpp reports forcing full prompt re-processing due to lack of cache data (SWA or hybrid/recurrent memory) and reprocesses the entire prompt every turn. This is an upstream limitation of hybrid-memory models, not a property of these quants. Budget for full prefill on each turn in multi-turn use.

Sampling

Qwen publishes two profiles. Note repetition_penalty stays at 1.0 in both — the intended lever is presence_penalty.

presence_penalty above 1.5 can cause language mixing.

⛔ The reasoning-effort trap

Thinking is on by default at reasoning_effort: "xhigh". With a small max_tokens the whole budget goes to reasoning and content comes back empty — the model looks broken when it is not.

The chat template accepts only xhigh, medium, low. Anything else raises:

Unexpected reasoning effort {...}. Supported types are xhigh (default), medium, and low.

In particular reasoning_effort: "none" is not valid and will throw. To disable thinking, use the separate flag:

--chat-template-kwargs '{"enable_thinking":false}'

To keep thinking but bound it, use '{"reasoning_effort":"low"}'.

Quantization methodology

# 1. measure the real BPW first — the help text is not reliable
llama-quantize --dry-run Qwen3.8-27B-BF16.gguf /tmp/x.gguf Q4_0_ROCMFP4_STRIX 8

# 2. quantize (~150 s for 27B at 16 threads)
llama-quantize Qwen3.8-27B-BF16.gguf Qwen3.8-27B-Q4_0_ROCMFP4_STRIX.gguf Q4_0_ROCMFP4_STRIX 16

Source: Qwen3.8-27B-BF16.gguf (50.11 GiB, 851 tensors) from ggml-org/Qwen3.8-27B-GGUF. Architecture is qwen35, already supported by the ROCmFPX fork — no porting was required for this model.

The dry-run step is not ceremony: the help text advertises STRIX at ~4.49 BPW and the real figure here is 4.39.

These were produced on the quantizer's unweighted reference path. The fork also has an importance-matrix path (rocmfp4_quantize_row_*_weighted, with an exhaustive weighted scale search) which is not used here — see Not yet measured.

Files

The draft heads are redistributed unmodified from ggml-org/Qwen3.8-27B-GGUF so the repo is self-contained.

Not yet measured

Listed so nobody mistakes absence for a pass:

Perplexity caveat. 40 chunks at ctx 2048 on held-out wikitext-2 (never used for any calibration here). It is a regression guard strong enough to say no measurable quality loss versus Q4_K_M; it is not a capability benchmark and says nothing about coding, tool use or long-context behaviour.

Known issues

1. Vulkan / CUDA / CPU cannot load these files — ROCmFP4 is a ROCm-only tensor format.
2. Prompt caching is disabled by the architecture — every turn reprocesses the full prompt.
3. Small max_tokens returns empty content — the budget goes to reasoning. Allow several hundred tokens, or set enable_thinking: false.
4. reasoning_effort: "none" throws — it is not a valid value despite appearing in some third-party documentation. Use enable_thinking: false.
5. --spec-draft-n-max defaults to 16, roughly halving throughput on this model.

Independent results

None yet. If you run this build, please open a discussion with hardware, GPU, ROCm version, runtime commit, exact command, context, prompt-processing tok/s, generation tok/s and peak RAM. Independent reproductions will be listed separately from author benchmarks and carry more weight.

License and attribution

Base model and MTP draft head are the Qwen team's, under Apache 2.0. ROCmFP4 quantisation types are from the ROCmFPX fork of llama.cpp. This repository contains the quantised weights and the measurements above.

<!-- CREDITS:START -->

Acknowledgements

ROCmFPX — maintained by charlie12345 The ROCmFP4 / ROCmFPX tensor formats (ggml types 100–106) exist only in this fork. Every ROCmFP4 file here was produced with its llama-quantize and runs on its runtime. Licensed MIT, based on upstream llama.cpp.

llama.cpp — ggml-org and contributors The inference engine, GGUF format and conversion tooling everything here is built on, and the source of the BF16 and MTP GGUFs used.

AMD ROCm — the compute platform these builds target, ROCm 7.2.4 on gfx1151 / Radeon 8060S.

Qwen team — the base model, its MTP head and its licence are theirs. This repository contributes quantisation and measurement only.

If you use these files, please credit ROCmFPX alongside this repository.

<!-- CREDITS:END -->

🩹 Prompt caching with the MTP draft head — fixed

Reported by a user of this repo: with --spec-type draft-mtp loaded, llama-server disabled prefix caching entirely. Every agentic turn reprocessed the whole prompt. Reproduced here on an 8045-token stable prefix:

279× less prompt processing per turn, with MTP still drafting.

Root cause

The saved speculative state is the MTP boundary — the target model's pre-norm hidden row at the cached prompt's exact end position. Any partial-prefix reuse would leave it describing a position that no longer exists, so the server demanded an exact full-prefix match and otherwise reprocessed cold, erasing its own context checkpoints on the way.

The fix

patches/mtp-prompt-cache-fix.patch (4 files, applies to 2809dc5) captures the speculative boundary inside the context checkpoint (common_prompt_checkpoint::data_spec). create_checkpoint runs between decode batches — exactly where that boundary is valid — so exact state is saved and restored together with the KV, never rebuilt.

⛔ Two approaches were tried first and rejected: rebuilding the boundary from a zero-fill changed the model's output (deterministically, 3/3), and truncating the KV back to the reuse point is impossible here — the bounded rollback window is 4 tokens against the 333 a real turn needs. Exact state restore is the only shape that preserves output.

Verification

Independently gated 10/10: same prompt cold vs warm, temperature 0, byte-identical every run, with the cache genuinely engaged (cache_n=5101, not a vacuous pass). The output hash also matches the unpatched build, so behaviour is unchanged. Fails closed — an unreachable rollback logs reason=spec-checkpoint-missing and cold-reprocesses rather than guessing.

Related upstream

This is the same family as open llama.cpp issues #20225, #19794 and #24055 — checkpoints being invalidated on hybrid/recurrent models. This patch is not upstreamed; it is offered here as-is.