tinyllava-1.1b-v0.1

About

This was trained by using TinyLlama as the base model using the BakLlava repo.

Examples

Prompt for both was, "What is shown in the given image?"

<img src="berserk.png" width="50%"> <br> <img src="sd.png" width="50%">

Install

If you are not using Linux, do NOT proceed, see instructions for macOS and Windows.

1. Clone this repository and navigate to LLaVA folder

git clone https://github.com/haotian-liu/LLaVA.git
cd LLaVA

1. Install Package

conda create -n llava python=3.10 -y
conda activate llava
pip install --upgrade pip  # enable PEP 660 support
pip install -e .

1. Install additional packages for training cases

pip install -e ".[train]"
pip install flash-attn --no-build-isolation

Upgrade to latest code base

git pull
pip install -e .

Launch a controller

python -m llava.serve.controller --host 0.0.0.0 --port 10000

Launch a gradio web server.

python -m llava.serve.gradio_web_server --controller http://localhost:10000 --model-list-mode reload

You just launched the Gradio web interface. Now, you can open the web interface with the URL printed on the screen. You may notice that there is no model in the model list. Do not worry, as we have not launched any model worker yet. It will be automatically updated when you launch a model worker.

Launch a model worker

This is the actual worker that performs the inference on the GPU. Each worker is responsible for a single model specified in --model-path.

python -m llava.serve.model_worker --host 0.0.0.0 --controller http://localhost:10000 --port 40000 --worker http://localhost:40000 --model-path ameywtf/tinyllava-1.1b-v0.1

Wait until the process finishes loading the model and you see "Uvicorn running on ...". Now, refresh your Gradio web UI, and you will see the model you just launched in the model list.

You can launch as many workers as you want, and compare between different model checkpoints in the same Gradio interface. Please keep the --controller the same, and modify the --port and --worker to a different port number for each worker.

python -m llava.serve.model_worker --host 0.0.0.0 --controller http://localhost:10000 --port <different from 40000, say 40001> --worker http://localhost:<change accordingly, i.e. 40001> --model-path <ckpt2>

If you are using an Apple device with an M1 or M2 chip, you can specify the mps device by using the --device flag: --device mps.